Design Considerations for Process Piping

Whether you’re expanding an existing facility or growing into a new one, your company probably needs process piping. However, there are a few different ways you can set up your piping. Keep reading for some design considerations for process piping.

The type of fluid

Before you can begin designing a process piping system, you have to identify the fluid you’ll be working with. For example, if you’re working primarily with fluids that have high corrosive properties or hot temperatures, they’ll require a different piping material. Additionally, in some cases, the diameter of the pipes you use can affect the temperature as well.

Location codes

Process piping requires very accurate installation in order to operate efficiently. However, you also must ensure you’re abiding by all your city’s guidelines and codes. Failure to meet all location codes can result in a hefty fine and possibly the shutdown of your facility until you’re up to code. You could think of these as a standard building code at your home.

Stress load and capacity

You should have a general sense of how much of the fluid you’ll work with. If you don’t take the time to get an approximation, your process piping may not have the capacity to handle the fluid you’re using. Some refer to this as the process pipe’s stress load. The main reason for this is because the fluids can run at different pressures. You don’t want to overwhelm your pipes.

Consider hiring a professional team

To reiterate, process piping requires a significant amount of accuracy and precision. In other words, this couldn’t be further from a DIY project. You should hire professionals to ensure you’re meeting building codes and the entire system is assembled correctly. A certified and experienced team will handle design, assembly, and so on.

There’s no question that process piping is complex, but that’s why there are experts for hire. You don’t want to attempt to do a project like this on your own or expect your workers to do the assembly. Instead, you should hire a professional to help you with design considerations for process piping.

Here at ICOM Mechanical, we take the guessing out of process piping with our expert contractors. We’ll handle the design and assembly and get you up to code in Silicon Valley and surrounding areas. So, contact us for your process piping contractor and we’ll get you an experienced team on your project.

Leave a Comment